Fluke 990DSL - Configuring the Tester; Function Keys

990DSL
Users Guide
3-10
Configuring the Tester
This section shows you how to configure the CopperPro so that it functions
appropriately for your particular work environment and testing situations. The
USER OPTIONS menu (Figure 3-4) lists the options available for configuring
the tester and customizing it to your needs.
(Test Lead calibration)
Power-Save
Timers
Batter
y
Status
Saved
Results
Language
& Units
RS232 Port
Setup
Phone
Numbers
Program
Download
Zero Leads
Self-Test
System
Version
Compan
y
Info.
Date / Time
System
Setups
Select function, then press Enter;
or press System Setups.
Initialize
Bluetooth
Upload
Setups
Restore All
Defaults
acy08s.eps
Figure 3-4. USER OPTIONS Menu
Function Keys
• Initialize Bluetooth initializes the optional Bluetooth Communications
modules connected to the tester and a PC, for wireless remote control or
upload operation.
• Upload Setups uploads stored setups to a PC via the serial port.
• Restore All Defaults resets all setup options to factory defaults.
• System Setups allows entry of operator name, wire center, location,
and job number (refer to “Creating a Custom Header for Test Result Files”
later in this chapter).