Fluke 990DSL - Selecting a Language and Associated Units of Measure

Setting Up and Operating the CopperPro
Configuring the Tester
3
3-13
To set a timer, follow these steps:
1. Press >, then O to display the
USER OPTIONS menu (Figure 3-4).
2. Select
Power-Save Timers. Press L.
3. To change a timer’s setting, position the cursor on the timer. Then, press
A(
Edit).
4. Supply the desired period of inactivity. Then, press L to save the value.
Note
The default period of inactivity is 10 minutes for the Snooze timer and
20 minutes for the “Power Down” timer.
Selecting a Language and Associated Units of Measure
The CopperPro displays and prints information in the following languages:
• English (U.S., U.K., and Canada)
• Spanish
• French (France and Canada)
• Portuguese (Brazil)
• German
• Danish
The tester also displays length in different units of measure.
When you select a language for the tester’s displays, the units of measure
associated with that language (and country) are automatically chosen. These
include units of measure for temperature, distance, and VF Noise, as well as
conductor names and the typical wire gauges that are employed for the
language/country you selected.
The default language for the tester’s displays is
English (USA).