Fuji Xerox Color 550

Common Service Settings
109
Tools
5
2 Select the display format.
3 When you select [12 Hour Clock], set [AM] or
[PM].
4 Specify [Hours] and [Minutes].
5 Select [Save].
NTP Time Synchronization
This setting cannot be used on this machine.
Connection Interval
This setting cannot be used on this machine.
Time Server Address
This setting cannot be used on this machine.
Auto Clear
Specify the time lapsed without any operation until the machine resets the settings
automatically.
When you select [On], specify a value between 10 and 900 seconds in 1 second increments.
When you select [Off], the settings are not reset automatically.
Note • When [Off] is selected, the machine will cancel the standby status and begin processing a
document after one minute has elapsed in anticipation of a job command.
Auto Job Release
Specify the time lapsed until the machine cancels the active job and starts the next job if an
error such as document or paper jams and running out of paper occurs during copying or
scanning. In that case, only those jobs not affected by the error can be processed.
When you select [On], specify a value in 1 minute increments. When you select [Off], the
active job is not canceled automatically.
Auto Print
Set the time period to start the next print job after the operation of the control panel (except
for the <Start> and <Clear All> buttons).
When you select [On], specify a value between 1 and 240 seconds in 1 second increments.
When you select [Off], printing starts immediately after the machine is ready.
Printer Lockout
You can set the machine to disable printing during the specified time period or to temporarily
disable printing.
Selecting [On] allows you to set [Set Lockout Duration] and/or [Allow User to Lock Out].
When [Allow User to Lock Out] is selected, the [Lock Out Printer] button needs to be
displayed on the right side of the [Services Home] screen.
For information on how to display the [Lock Out Printer] button on the [Services Home] screen, refer to
"Assigning Services to <Custom> Buttons" (P.19).
Set Lockout Duration
Set the time period to disable printing.
Specify the start and end time to disable printing in 1 minute increments.