2 Paper and Other Media
30
Paper and Other Media
2
2 Load and align the edge of the paper against
the left edge of the tray, with the side to be
copied or printed on facing down.
Important • Do not load paper above the maximum fill
line ("MAX" in the right illustration). It may
cause paper jams or machine
malfunction.
3 Push the tray in gently until it comes to a
stop.
Important • When inserting the tray, push it gently. Forcibly pushing in the tray may cause machine
malfunction.
Loading Paper in Tray 5 (Bypass)
When printing or copying on a size or type of paper that cannot be set in Trays 1 to 4,
or Trays 6 (optional) or 7 (optional), use Tray 5 (bypass). The following describes the
procedure for loading paper in Tray 5.
Important • To prevent paper jams and erroneous detection of paper loaded in the tray by the machine,
do not take out paper of a package until the tray runs out of paper.
Note • Carefully fan paper before loading it in a tray. Otherwise, the paper may stick together,
resulting in paper jams, or multiple sheets being fed to the machine simultaneously.
1 Open Tray 5.
Note • If necessary, pull out the extension tray.
The extension tray can be extended in
two stages. Pull out the extension tray
gently.
2 Adjust the paper guides to the size of the
paper to be loaded.
3 Load paper with the side to be copied or
printed on facing up, inserting the paper until
its edge lightly touches against the paper
feed entrance.
Important • Do not load mixed paper types into the
tray.
• Do not load paper above the maximum fill
line ("MAX" in the illustration). It may
cause paper jams or machine
malfunction.
To Next Page
Loading...
