Re-inserting the Staple Cartridge into the Cartridge Unit
267
Problem Solving
7
Re-inserting the Staple Cartridge into the Cartridge Unit
This section describes how to re-insert the staple cartridge to the cartridge unit when it
has been inserted incorrectly or removed accidentally.
1 Open the staple cartridge cover as shown in
the illustration, and remove the jammed
staple.
2 Look for the lever on the rear side of the unit.
3 Move the lever in the direction indicated by
the arrow in the illustration.
Important • Be careful when removing jammed
staples to avoid hurting your fingers and
nails.
4 Turn the unit upright while holding the lever,
and then remove the staple cartridge from
the cartridge unit.
To Next Page
Loading...
