Loading Paper
37
Paper and Other Media
2
Improving the Paper Feeding Performance in Trays 6 and 7 (High
Capacity Feeder C1-DS)
This section describes how to improve the paper feeding performance.
If images are skewed even when paper is loaded correctly, use the following procedure
to feed paper more accurately.
Important • If any of the following types of paper is loaded in the tray, performing the procedure in this
section may cause the paper to be fed improperly, resulting in paper jams.
1 Pull out the tray towards you until it stops.
Important • While the machine is processing a job, do
not pull out the tray.
2 Slide the switch on top of the long-side paper
guide to the right until it stops.
Note • To return the switch to its original
position, slide it to the left until it stops.
3 If the paper feeding performance is not
improved after Step 2, slide the switch on the
right front side towards the back of the
machine until it stops.
Important • To return the switch to its original
position, slide it towards you until it stops.
4 Push the tray in gently until it comes to a stop.
- Heavyweight (221 gsm or more) - Tab Stock (221 gsm or more)
- Heavyweight Reload (221 gsm or more) - Labels (106 gsm or more)
- Hole Punched Heavyweight
(221 gsm or more)
- Transparency
- Gloss (106 gsm or more) - Adhesive
- Gloss Reload (106 gsm or more)
To Next Page
Loading...
