Fuji Xerox Color 550

2 Paper and Other Media
38
Paper and Other Media
2
Loading Paper in Tray 8 (Interposer on Finisher D4 and Finisher D4 with
Booklet Maker)
The following describes the procedure for loading paper in optional Tray 8 (Interposer).
The Interposer allows you to load paper (blank, copied paper, etc.), which will only be
used as separators and covers, so that the machine does not output on the paper
loaded in this tray.
Note • When adding paper to interposer, remove any paper remaining in the tray, add it to the stack
of paper to be added, then load all of the paper into the interposer at once.
1 Hold the center of the paper guides and slide
them to match the size of the paper to be
loaded.
2 Load the paper, neatly aligning all edges.
Note • Do not load paper exceeding the
maximum fill line. It may cause paper
jams or machine malfunctions.
Loading Tab Stock Paper in Tray 8 (Interposer on Finisher D4 and
Finisher D4 with Booklet Maker)
The following describes the procedure for loading tab paper in optional Tray 8
(Interposer).
1 Hold the center of the paper guides and slide
them to mach the size of the paper to be
loaded.