Fuji Xerox Color 550

Adjust Fold Position
295
Appendix
8
Booklet Position Adjustment
Adjust the booklet position.
1 Select [Booklet], and press [Change
Settings].
2 Press [Sample Printout].
3 Select the tray in which you loaded paper,
select [2-Sheet Stack], and press the <Start>
button.
A sample printout is printed.
4 Select the tray in which you loaded paper, select [15-Sheet Stack], and press the
<Start> button.
A sample printout is printed.
5 Press [Close].
6 Check the sample printout, and measure the position offset amount for 2-sheet stack
and 15-sheet stack.
7 Press [Booklet Fold State (2 Sheets)].
8 Select the state of the fold and staple
position of the output paper, and enter the 2-
sheet stack offset amount you measured in
Step 6 in [Values A & B Before Adjustment].