Fuji Xerox Color 550

8 Appendix
294
Appendix
8
Single Fold Position Adjustment
Adjust the single fold position.
1 Select [Single Fold], and press [Change
Settings].
2 Specify [Sheets to be folded], and press
[Sample Printout].
3 Select the tray in which you loaded paper,
and press the <Start> button.
A sample printout is printed.
4 Press [Close].
5 Check the printed sample printout, and measure the offset amount.
6 Select [Long at Left] or [Long at Right].
7 Enter the measurement value you obtained in Step 5 in [Value A Before Adjustment].
8 Press [Adjust].
9 Press [Sample Printout] again to print a sample printout, and check the adjustment
results.
10 Make adjustments again if necessary. (Steps 6 to 8)
11 Press [Save].