Fuji Xerox Color 550

8 Appendix
272
Appendix
8
Specifications
This section lists the main specifications of the machine. Note that the specifications
and the appearance of the product may change without prior notice.
Copy Function
Type Console
Memory 2.0 GB
HDD 80 GB - 160 GB
Important • Not all the HDD space described above can be used.
Color Capability Full color
Scanning Resolution 600 x 600 dpi
Printing Resolution 2,400 x 2,400 dpi (multicolored photo), 600 x 600 dpi (text/
textphoto/photo/maps)
Halftone/Printable Colors 256 color gradation for each color (16,700,000 colors)
Warm-up Time 90 seconds or less*
When the main power is switched on, it takes 90 seconds or less*.
*: The values are based on a room temperature of 20 °C and on the
factory default setting.
Original Paper Size The maximum size is 297 x 432 mm (A3, 11 x 17") for both sheets
and books.
Output Paper Size Maximum: SRA3, 13 x 18" (330.2 x 457.2 mm)
[Maximum for bypass tray: 13 × 19.2" (330.2 x 488 mm)]
Minimum: A5
[Minimum for bypass tray: Postcard (100 x 148 mm), Envelope
(120 x 235 mm)]
Image loss width: Top edge, 4 mm or less; bottom edge, 4 mm or
less; left and right edges, 3.5 mm or less
Output Paper Weight Paper Tray 1 to 4: 64 - 220 gsm
Paper Tray 5: 64 - 300 gsm
Important • Use paper recommended by Fuji Xerox. Copying may not
be performed correctly depending on the conditions.
First Copy Output Time Monochrome: 4.1 seconds (for A4 /monochrome priority mode)
Color: 6.5 seconds (for A4 /color priority mode)
Important • The values may vary depending on the machine
configuration.
Reduction/Enlargement Size-for-Size 1:1±0.7%
Preset % 1:0.500, 1:0.707, 1:0.816, 1:0.866, 1:1.154, 1:1.225,
1:1.414
Variable % 1:0.25 - 1:4.00 (1% increments)