Fuji Xerox Color 550

Optional Components
281
Appendix
8
Optional Components
The following table shows the optional components available. To purchase these
options, contact your local Fuji Xerox representative.
Note • The optional components are subject to change without notice.
• For the latest information, contact your local Fuji Xerox representative.
Product Name Description
A4 High Capacity Feeder A tray that can load 2,000 sheets of paper (when using 80 gsm
paper).
High Capacity Feeder
C1-DS
Allows you to load 2,000 sheets of paper (when using 80 gsm
paper) into Trays 6 and 7.
Postcard Kit A kit to set the Postcard Unit to the machine.
Catch Tray Fan Kit A kit to set the Catch Tray Fan to the machine.
Offset Catch Tray This unit allows to eject paper with an offset.
Finisher C2 Staples or hole-punches output sheets.
Finisher C2 with Booklet
Maker
Staples or hole-punches output sheets. Also folds output
sheets in half or staples folded output.
3 Hole Punch Unit for
C Finisher
The number of punching holes can be changed to 3.
Note • This is available only when the Finisher C2 or Finisher
C2 with Booklet Maker is installed.
Finisher D4 Staples or hole-punches output sheets.
Interposer is installed for loading paper to be used as
separators and covers.
Finisher D4 with Booklet
Maker
Staples or hole-punches output sheets. Also folds output
sheets in half or staples folded output.
Interposer is installed for loading paper to be used as
separators and covers.
D4 Folder Unit Used to fold sheets in Z-folded or C-folded form.
Note • This is available only when the Finisher D4 or Finisher
D4 with Booklet Maker is installed.
3 Hole Punch Unit for
Finisher D4
The number of punching holes can be changed to 3.
Note • Four-hole punching cannot be used when this option is
installed.
• This is available only when the Finisher D4 or Finisher
D4 with Booklet Maker is installed.
Interface Module Used when attaching the Finisher D4 or Finisher D4 with
Booklet Maker. The module is installed with a mechanism for
adjusting paper curl.