8 Appendix
280
Appendix
8
Interface Module (Optional)
An Interface Module is required when connecting a Finisher D4 or a Finisher D4 with
Booklet Maker to the main unit.
Interposer Paper Size Maximum: A3, 11 x 17"
Minimum: B5
Note • You cannot print on the paper loaded in
interposer.
Paper Weight 64 - 220 gsm
Capacity 200 sheets
Important • When using 80 gsm paper.
Power Supply 100 - 240VAC, 2.0-1.0A
Dimensions Width 1,055 x Depth 727 x Height 1,165 mm
When D4 Folder Unit is installed:
Width 1,255 x Depth 727 x Height 1,165 mm
Weight 150 kg
When D4 Folder Unit is installed: 190 kg
Note • This weight includes staple cartridge.
Space Requirement Width 2,575 x Depth 804 mm (main unit +
interface module + Finisher D4 with Booklet
Maker. When the bypass tray is extended to the
maximum.)
Power Supply 100 - 240VAC, 2.5-1.5A
Dimensions Width 345 x Depth 725 x Height 992 mm
Weight 45 kg
Space Requirement Width 1,514 x Depth 804 mm (Main unit +
interface module. When the bypass tray is
extended to the maximum.)
To Next Page
Loading...
