Specifications
279
Appendix
8
Stacker
Capacity
Important
•When using 80
gsm paper.
Output Tray 500 sheets (A4)
Finisher Tray
(not stapled)
A4: 2,000 sheets
B4 or larger: 1,500 sheets
Mix stack: 300 sheets*
*: When larger size papers are loaded on smaller size
papers.
Finisher Tray
(stapled)
A4: 200 sets or 2,000 sheets
B4 or larger: 100 sets or 1,500 sheets
Booklet Tray 20 sets
Note • Some papers may not be placed into tray
depending on the Paper Weight.
Staple Capacity 100 sheets (64 - 300 gsm)
Note • When using paper over A4, or 8.5 x 11",
maximum stapled sheets is 65 sheets.
• Depending on the type of paper that is
being stapled, the stapled nails may be
bent.
Paper Size Maximum: A3, 11 x 17"
Minimum: B5
Position <1 place>
Front: Angled stapling
Center: Parallel stapling
Rear: Parallel stapling*
<2 places>
Parallel stapling*
*: The supported paper is A4 and A3.
Punch Paper Size Maximum: A3, 11 x 17"
Minimum: B5 (2 holes), A4 (4 holes)
Number of Holes 2 or 4,
3 (optional)
Paper Weight 64 - 220 gsm
Booklet
Finishing
Important
•When using 80
gsm paper.
Capacity Center binding: 20 sheets*
Center folding: 5 sheets
Single folding: 1 sheet
*: 19 sheets when attaching a cover. The maximum
number of sheets can be changed by the customer
engineer (up to 25 sheets).
Paper Size Maximum: A3, 13 x 18"
Minimum: A4, 8.5 x 11"
Paper Weight Center binding: 64 to 220 gsm*
Center folding: 64 to 220 gsm*
Single folding: 64 to 220 gsm
*: Up to 220 gsm paper can be used for cover sheets.
When 91 to 220 gsm paper is used for a cover,
paper that can be used for body contents becomes
64 to 80 gsm.
Folding
(when D4
Folder Unit is
installed)
Z-Fold Paper Size A3, B4, 11 x 17"
Paper Weight 64 - 90 gsm
C-Fold Paper Size A4, 8.5 x 11"
Paper Weight 64 - 90 gsm
To Next Page
Loading...
