7 Problem Solving
254
Problem Solving
7
Paper Jams in the Interface Module
This section describes how to clear paper jams occurring in the Interface Module.
The following shows the reference section for the procedures to clear a paper jam in
each location.
Paper Jams at Lever 1a..............................................................................................................254
Paper Jams at Lever 2b .............................................................................................................255
Paper Jams at Lever 2a..............................................................................................................255
Note • Remedies will differ depending on where the paper jam occurs. Therefore, be sure to follow
the instructions displayed to remove the jammed paper.
Paper Jams at Lever 1a
1 Open the front cover of the Interface Module.
2 Pull lever 1a downward and remove the
jammed paper.
Note • If the paper is torn, make sure no piece of
paper remains inside the machine.
3 Return lever 1a to its original position.
4 Close the front cover of the Interface Module.
Note • A message will be displayed and the machine will not operate if the front cover of the
Interface Module is even slightly open.
To Next Page
Loading...
