Alignment Adjustment Settings
283
Appendix
8
3) If the printout image is misaligned, adjust the position in following order:
z
Skew Adjustment
z
Perpendicularity Adjustment
z
Scale Adjustment
z
Print Position Adjustment
4) Save the adjustment values.
5) Assign the saved values to a custom paper and a tray.
Alignment Adjustment Settings
Save the adjustment results for squareness, skew, scale, and print position as an
alignment adjustment type, and then assign the type to the tray.
1 Load paper in a tray.
2 Press the <Log In/Out> button, and enter the
System Administrator Mode.
3 Enter the system administrator’s user ID with
the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a password is required, select [Next]
and enter the system administrator’s
passcode, and select [Enter].
Note • The default user ID is “11111”.
• The default passcode is “x-admin”.
4 Select [Tools] on the [Services Home]
screen.
5 Select [System Settings] > [Common
Service Settings] > [Maintenance].
To Next Page
Loading...
