Fuji Xerox Color 550

Adjust Fold Position
297
Appendix
8
5 Check the printed sample printout, and measure the A and B fold position movement
amounts.
6 Enter the measurement values you obtained
in Step 5 in [Values A & B Before
Adjustment], and the final value you want
after adjustment in [Desired Values A & B].
Important • Set value A and value B so that an edge
of the paper does not extend past a fold
position of the paper. An edge of paper
extending past a fold position of the paper
may cause a paper jam.
7 Press [Adjust].
8 Press [Sample Printout] again to print a sample printout, and check the adjustment
results.
9 Make adjustments again if necessary. (Step 6)
10 Press [Save].
Z Fold Position Adjustment
Adjust the Z fold position.
1 Select [Z Fold-A4 ] or [Z Fold-8.5 x 11" ],
and press [Change Settings].
2 Press [Sample Printout].