2 Paper and Other Media
26
Paper and Other Media
2
Unusable Paper
Using paper not recommended by Fuji Xerox and transparencies may cause a paper
jam or machine malfunction. Use paper recommended by Fuji Xerox.
z
Color transparency sheets (bordered with a white frame)
z
Pre-printed paper printed on another printer or offset press
z
Pre-printed paper printed on this printer
z
Inkjet paper
z
Tracing paper
z
Folded, creased, or curled paper
z
Label sheets whose face sheet surface does not cover the entire backing sheet
z
Envelopes with sticky adhesive
z
Multi-color printed postcard
Storing and Handling Paper
Please keep the following points in mind when storing paper
z
Store paper inside a cabinet or other dry place. Paper that has absorbed moisture
can cause paper jams and image quality defects.
z
After opening a package of paper, wrap up the remaining paper to store it. It is
recommended that you include moisture prevention packets.
z
Paper should be stored flat to prevent bends or warping.
Please adhere to the following points when setting paper into a tray
z
Align the stack of paper neatly before setting it in a tray.
z
Do not use paper that is folded, creased, or heavily warped.
z
Do not use waved or curled paper.
z
Do not load paper of mixed sizes together into a tray.
z
Transparencies and labels can cause paper jams, and multiple sheets can be fed to
the printer at once. Be sure to carefully fan these types of paper.
z
When continuously outputting onto transparencies, transparency sheets may
sometimes stick to each other. Remove transparencies from the output tray every 20
or so sheets, and fan them to cool them down.
To Next Page
Loading...
