8 Appendix
296
Appendix
8
9 Press [Save].
10 Set [Booklet Fold State (15 Sheets)] in the
same way.
Note • Adjustment is made automatically when
loading stacks of 2 to 15 sheets.
• To load stacks of more than 2 or less than
15 sheets, adjust the [Variable-Sheet
Booklet] setting.
11 Press [Adjust].
12 Press [Sample Printout] again to print a sample printout, and check the adjustment
results.
13 Make adjustments again if necessary. (Steps 7 to 10)
14 Press [Save].
C Fold Position Adjustment
Adjust the C fold position.
1 Select [C Fold-A4 ] or [C Fold-8.5 x 11" ],
and press [Change Settings].
2 Press [Sample Printout].
3 Select the tray in which you loaded paper,
and press the <Start> button.
A sample printout is printed.
4 Press [Close].
To Next Page
Loading...
