Fuji Xerox Color 550

Adjust Fold Position
293
Appendix
8
13 Set the necessary items, and press [Sample
Printout].
14 Select the tray in which you loaded paper in
Step 1, and then press the <Start> button.
15 Measure the fold position with a sample printout, and adjust the fold position.
16 Make adjustments to the items if necessary.
17 After you finish making adjustments, print another sample printout with [Sample
Printout] and check the adjustment results.
18 Make adjustments again if necessary. (Steps 12 to 14)
19 Press [Save].
20 Press [Close] until the [Adjust Fold Position] screen appears.
21 Select the tray to apply the fold position
adjustment type that you just saved (the tray
which you loaded paper in Step 1), and then
press [Change Settings].
22 Select the adjusted fold position type and
press [Save].