Fuji Xerox Color 550

8 Appendix
292
Appendix
8
6 Select [Finisher Adjustment].
7 Select [Adjust Fold Position].
8 Select [Fold Position Type Setup], and press
[Change Settings].
9 Select the fold position type you want to set
or adjust, and press [Change Settings].
10 Select [Name], and press [Change Settings].
11 Enter the type name, and press [Save].
Note • We recommend using a name such as "Single Fold Plain" that allows you to know what the
content is.
12 Select the fold type, and press [Change Settings].
For details on making each fold adjustment, refer to the following sections.
z
For single fold, refer to "Single Fold Position Adjustment" (P.294).
z
For booklet, refer to "Booklet Position Adjustment" (P.295).
z
For C fold, refer to "C Fold Position Adjustment" (P.296).
z
For Z fold, refer to "Z Fold Position Adjustment" (P.297).
z
For Z fold half sheet, refer to "Z Fold Half Sheet Position Adjustment" (P.298).