7 Problem Solving
266
Problem Solving
7
4 Remove the jammed staples as shown in the
illustration.
5 While holding the tabs of the removed
booklet staple cartridge, push the cartridge
back to its original position. Lightly push the
cartridge down until you hear it click into
place.
6 Return the unit to its original position.
7 Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.
If you cannot remove jammed staples even after you perform the above procedure,
contact your local Fuji Xerox representative.
To Next Page
Loading...
