Fuji Xerox Color 550

Copy Service Settings
137
Tools
5
Center Erase/Binding Edge Erase
Set the default value for [Center] in [Edge Erase] in the [Layout Adjustment] screen. Set the
value from 0 to 50 mm in 1 mm increments.
Note • You cannot copy the whole area even if you set [0] to [Center Erase/Binding Edge Erase].
Edge Erase - 2 Sided Original - Side 2
Set the default value for [2 Sided Original - Side 2] of [Edge Erase] in the [Layout Adjustment]
screen.
Image Shift - Side 1
Set the default value for [Side 1] of [Image Shift] in the [Layout Adjustment] screen.
Image Shift - Side 2
Set the default value for [Side 2] of [Image Shift] in the [Layout Adjustment] screen.
Image Rotation
Set the default value for [Image Rotation] in the [Layout Adjustment] screen.
Image Rotation - Rotation Direction
Set the default value for [Image Rotation - Rotation Direction] of [Image Rotation] in the
[Layout Adjustment] screen.
Original Orientation
Set the default value for [Original Orientation] in the [Layout Adjustment] screen.
Pages per Side
Set the default value for [Pages per Side] in the [Copy] and [Output Format] screens.
Copy Output
Set the default value for [Copy Output] in the [Copy] screen.
Uncollated - Default Separator Tray
Set the default value for [Separators Tray] of [Uncollated with Separators] in the [Copy
Output] screen.
Output Destination
Set the default value for [Output/Offset] of [Copy Output] in the [Copy] screen.
Face Up/Down Option
Set the default value for [Face Up/Down Output] in the [Output Format] screen.
Sample Job
Set the default value for [Sample Job] in the [Job Assembly] screen.
Annotations - Stored Comment
Set the default value for [Stored Comments] displayed when [On] is selected for [Comment]
of [Annotations] in the [Output Format] screen.
You can select a comment type from eight preset types and custom text registered.
For information about how to set custom text, refer to "Annotations - Create Comments" (P.142).