Fuji Xerox Color 550

1 Before Using the Machine
20
Before Using the Machine
1
2 Enter the system administrator’s user ID with
the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next]
and enter the system administrator’s
passcode, and select [Enter].
Note • The default user ID is "11111".
• The default passcode is "x-admin".
3 Select [Tools] on the [Services Home]
screen.
Note • When the [Services Home] screen is not
displayed on the touch screen, press the
<Services Home> button.
4 Select [System Settings] > [Common
Service Settings] > [Screen/Button Settings].
5 Select [Custom Button 2], and then select
[Change Settings].
Note • Select [ ] to display the previous screen
or [ ] to display the next screen.
6 Select [Stored Programming].
Important • Only [(Not Set)], [Copy], [Simple Copy],
[Network Scanning], and [Stored
Programming] can be selected.
Note • Select [ ] to display the previous screen
or [ ] to display the next screen.
7 Select [Save].