Fuji Xerox Color 550

8 Appendix
290
Appendix
8
1 Check the sample printout, and measure the print position offset amount that
occurred.
z
X Print Position
Specify a positive value when you want to move the position of the image in the
opposite direction to the paper feed direction, and a negative value when you want
to move the position of the image in the paper feed direction.
z
Y Print Position
Specify a positive value when you want to move the position of the image toward the
back of the machine, and a negative value when you want to move the position of
the image toward the front of the machine.
2 Select [X Print Position] or [Y Print Position],
and press [Change Settings].
3 Enter a value with the difference X measured
in Step 1 added as the current setting value
of [Side 1] and [Side 2] of [X Print Position].
Enter a value with the difference Y measured
in Step 1 added as the current setting value
of [Side 1] and [Side 2] of [Y Print Position].
Note • [X Print Position]: Specify a positive value
when you want to move the position of the
image in the opposite direction to the
paper feed direction, and a negative value
when you want to move the position of the
image in the paper feed direction.
• [Y Print Position]: Specify a negative
value to move the image toward the front
of the machine, or a positive value to
move it toward the rear.
4 Press [Save].