Adjust Fold Position
299
Appendix
8
2 Press [Sample Printout].
3 Select the tray in which you loaded paper,
and press the <Start> button.
A sample printout is printed.
4 Press [Save].
5 Check the printed sample printout, and measure the A and B fold position movement
amounts.
6 Enter the measurement value you obtained
in Step 5 in [Values A & B Before
Adjustment], and the final value you want
after adjustment in [Desired Values A & B].
Important • Set value B so that an edge of the paper
does not extend past a fold position of the
paper. An edge of paper extending past a
fold position of the paper may cause a
paper jam.
7 Press [Adjust].
8 Press [Sample Printout] again to print a sample printout, and check the adjustment
results.
9 Make adjustments again if necessary. (Step 6)
10 Press [Save].
To Next Page
Loading...
