2 Paper and Other Media
42
Paper and Other Media
2
1 Pull out the tray until it stops.
Important • While the machine is processing a job, do
not pull out the tray that is being used for
job.
• To prevent paper jams or erroneous detection of loaded paper in a tray by the machine, do
not add paper on top of any remaining paper in the tray.
2 Remove any paper loaded in the tray.
3 While pinching the paper guide, move the
guide to match the size of the paper to be
loaded.
Note • If loading tab paper, move the paper
guides to the edges of the tray, load the
paper, and move the guides so that they
lightly contact the edges of the paper.
4 Load and align the edge of the paper against
the left side of the tray, with the side to be
copied or printed on facing down.
Important • Do not load paper exceeding the
maximum fill line. It may cause paper
jams or machine malfunctions.
5 Push the tray in gently until it comes to a stop.
Important • When inserting the tray, push it gently. Forcibly pushing in the tray may cause machine
malfunction.
Note • Affix the paper size label to the front of the paper tray.
6 If you have changed the paper type, you need to change the tray settings.
For more information on paper type settings, refer to "Changing the Paper Settings" (P.47).
To Next Page
Loading...
