Fuji Xerox Color 550

Replacing Consumables
75
Maintenance
3
2 Move the lock lever, shown in the illustration,
left-ward to the position.
3 Hold R5 as shown in the illustration and
remove the staple waste container from the
machine.
4 Put the used staple waste container into the
supplied plastic bag.
Important • Do not disassemble the container and
return it to your local Fuji Xerox
representative.
5 Hold the new staple waste container by R5
and push it into the machine.
Important • To prevent injury, do not put your fingers
on top of the container.
6 Push R5 until the lock lever moves to the
position.
7 Close the right cover of the finisher.
Note • A message will be displayed and the machine will not operate if the right cover of the finisher
is even slightly open.