120 Upgrade and Maintenance Manual TX1310 M3
Expansion cards and backup units
9.3.3.3 Installing an expansion card
Ê If applicable, install a slot bracket on the new expansion card, see section
"Installing a slot bracket" on page 110.
Ê Install the new expansion card, see section "Installing an expansion card" on
page 115.
9.3.3.4 Concluding steps
Ê "Reassembling" on page 51
Ê "Connecting the power cord" on page 56
Ê "Switching on the server" on page 57
Ê "Enabling replaced components in the BIOS" on page 66
Ê "Looking up changed MAC / WWN addresses" on page 72
Ê "Updating the NIC configuration file in a Linux and VMware environment" on
page 69
Ê "Resuming BitLocker functionality" on page 70
Ê If applicable, restore LAN teaming configurations, see"After
replacing/upgrading LAN controllers" on page 73
To Next Page
Loading...
