194 Upgrade and Maintenance Manual TX1310 M3
System board and components
15.3.3.2 Removing the defective TPM
Ê Remove the TPM, see section "Removing the TPM" on page 191.
Ê Leave the TPM spacer on the system board when removing the defective
TPM.
15.3.3.3 Installing the new TPM
I The TPM spacer is already present on the system board.
Ê Install the new TPM, see section "Installing the TPM" on page 186.
15.3.3.4 Concluding steps
Ê Install all expansion cards, see section "Expansion cards" on page 113.
I Make sure that you reinstall each card in the slot it was located before
the replacement.
Ê "Reassembling" on page 51
Ê "Connecting the power cord" on page 56
Ê "Switching on the server" on page 57
Ê "Resuming BitLocker functionality" on page 70
To Next Page
Loading...
