TX1310 M3 Upgrade and Maintenance Manual 125
Figure 62: Installing a memory module
Ê Align the notch on the bottom of the module with the crossbar in the slot.
Ê Press down on the memory module until the securing clips snap into the
cutouts at each end of the module.
10.2.3 Concluding steps
Ê "Reassembling" on page 51
Ê "Connecting the power cord" on page 56
Ê "Switching on the server" on page 57
Ê If applicable, "Updating or recovering the system board BIOS" on page 64.
Ê "Resuming BitLocker functionality" on page 70
To Next Page
Loading...
