TX1310 M3 Upgrade and Maintenance Manual 159
12.2.1.4 Installing the ODD
Figure 92: Installing the ODD
Ê While pressing the fixation plate against the ODD, insert the ODD into
accessible drive bay 1 and push until it is firmly seated in its connector on
the ODD back plate.
I Since the ODD is connected to the ODD back plate, no further cable
connection is necessary.
12.2.1.5 Concluding steps
Ê "Reassembling" on page 51
Ê "Connecting the power cord" on page 56
Ê "Switching on the server" on page 57
Ê "Reconfiguring the backup software solution" on page 66
Ê "Resuming BitLocker functionality" on page 70
To Next Page
Loading...
