TX1310 M3 Upgrade and Maintenance Manual 87
Figure 36: Inserting the 3.5-inch HDD
Ê Insert the HDD into its drive bay.
Ê Slide the HDD into its drive bay until the Easyrails click in place.
Ê When using a RAID array, add the additional HDD/SSD to the RAID array.
I Configuring the RAID array, refer to the documentation of the RAID
controller, used in your configuration, see section "Documents you
need at hand" on page 26.
7.2.4 Concluding steps
Ê "Reassembling" on page 51
Ê "Connecting the power cord" on page 56
Ê "Switching on the server" on page 57
To Next Page
Loading...
