TX1310 M3 Upgrade and Maintenance Manual 127
Figure 64: Installing a memory module
Ê Remove the ejected memory module.
Ê Close the securing clips.
V CAUTION!
If the clips are open, they can collide with a cable clamp.
10.3.3 Concluding steps
Ê "Reassembling" on page 51
Ê "Connecting the power cord" on page 56
Ê If applicable, "Updating or recovering the system board BIOS" on page 64
Ê "Switching on the server" on page 57
Ê "Resuming BitLocker functionality" on page 70
To Next Page
Loading...
