Fujitsu PRIMERGY TX1310 M3

64 Upgrade and Maintenance Manual TX1310 M3
Basic software procedures
5.2 Completing the maintenance task
5.2.1 Updating or recovering the system board BIOS
After replacing the system board or a CPU, it is essential to upgrade the BIOS
to the latest version. The latest BIOS version is available from the Fujitsu
support internet pages at:
http://ts.fujitsu.com/support/
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/
I Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from BIOS updates.
5.2.1.1 Updating or recovering the system board BIOS
BIOS flash procedure
I For Japan, follow the instructions provided separately.
Ê Perform the BIOS flash procedure as described in your server’s "BIOS
Setup Utility" reference manual.
BIOS recovery procedure
I For Japan, follow the instructions provided separately.
Ê Perform the BIOS recovery procedure as described in your server’s "BIOS
Setup Utility" reference manual.