Fujitsu PRIMERGY TX1310 M3 - Removing a 3.5-Inch HDD

90 Upgrade and Maintenance Manual TX1310 M3
Hard disk drives (HDDs)
7.3.2 Removing a 3.5-inch HDD
Figure 37: Removing a 3.5-inch HDD
Ê Press in on the green handles on the Easyrails (1) to disengage the locking
mechanism.
Ê Pull the HDD completely out of its drive bay (2).
Figure 38: Detaching the Easyrails
Ê Detach the Easyrails from the HDD.