Fujitsu PRIMERGY TX1310 M3

126 Upgrade and Maintenance Manual TX1310 M3
Main memory
10.3 Removing memory modules
10.3.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 61
Ê "Shutting down the server" on page 44
Ê "Disconnecting the power cord" on page 45
Ê "Getting access to the component" on page 46
10.3.2 Removing a memory module
Figure 63: Installing a memory module
Ê Eject the desired memory module by pressing out the securing clips at each
end of the memory slot.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less