Fujitsu PRIMERGY TX1310 M3

128 Upgrade and Maintenance Manual TX1310 M3
Main memory
10.4 Replacing memory modules
10.4.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 61
Ê "Shutting down the server" on page 44
Ê "Disconnecting the power cord" on page 45
Ê "Getting access to the component" on page 46
10.4.2 Removing the defective memory module
Ê Remove the memory module, see section "Removing a memory module" on
page 126.
10.4.3 Installing the new memory module
Ê Install the memory module, see section "Installing a memory module" on
page 124.
10.4.4 Concluding steps
Ê "Reassembling" on page 51
Ê "Connecting the power cord" on page 56
Ê "Switching on the server" on page 57
Ê "Enabling replaced components in the BIOS" on page 66
Ê "Resuming BitLocker functionality" on page 70
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Software: 5 minutes
Tools: tool-less