220 Upgrade and Maintenance Manual TX1310 M3
Ê Fasten the bottom HDD cage with two screws.
Ê If applicable, install HDD1 and HDD2, see section "Installing a 3.5-inch
HDD" on page 86.
Ê Push the system board tray back into the chassis, see section "Installing the
system board" on page 200.
Ê Connect the cables to the system board.
I For further cabling information, please refer to section "Cabling plans"
on page 206
16.3.2.4 Concluding steps
Ê "Reassembling" on page 51
Ê "Connecting the power cord" on page 56
Ê "Switching on the server" on page 57
To Next Page
Loading...
