TX1310 M3 Upgrade and Maintenance Manual 75
6 Power supply unit (PSU)
Safety notes
V CAUTION!
● Do not disassemble the PSU. Doing so may cause electric shock.
● Areas around the PSU may remain extremely hot after shutdown.
After shutting down the server, wait for hot components to cool down
before removing the PSU.
● When installing a PSU, ensure that the connector of the PSU is not
damaged or bent.
● The PSU is heavy, so handle it carefully. If you drop it by mistake,
injuries may result.
● For further safety information, see chapter "Important information" on
page 29.
6.1 Basic information
The server is equipped with one non-redundant PSU.
To Next Page
Loading...
