TX1310 M3 Upgrade and Maintenance Manual 175
14 Serial connector
Safety notes
V CAUTION!
For further safety information, please refer to chapter "Important
information" on page 29.
14.1 Installing the serial connector
14.1.1 Preliminary steps
Ê "Shutting down the server" on page 44
Ê "Disconnecting the power cord" on page 45
Ê "Getting access to the component" on page 46
Ê "Removing the air deflector" on page 58
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tool: – flat screw driver
– Hexagon screw driver 5 mm
To Next Page
Loading...
