56 Upgrade and Maintenance Manual TX1310 M3
Basic hardware procedures
4.6 Connecting the power cord
V CAUTION!
The power supply automatically adjusts to any mains voltage in the
range of 100 VAC - 240 VAC. You may only operate the server if its rated
voltage range corresponds to the local mains voltage.
Figure 16: Securing the power cord
Ê Connect the power cord to the PSU.
Ê Connect the mains plug to a grounded mains outlet in the in-house power
supply network.
IIt will take about 60 seconds until the server can be powered on.
To Next Page
Loading...
