216 Upgrade and Maintenance Manual TX1310 M3
16.3.1.3 Installing the new system cable
Ê Install the new cable to the top HDD cage and accessible drives.
Ê Connect the cables to the system board.
I For further cabling information, please refer to section "Cabling plans"
on page 206.
Ê "Installing the PSU" on page 79
Ê "Installing an ODD" on page 157
Ê Push back the backup drive until it snaps into place.
Ê If applicable, install HDD3 and HDD4, see section "Installing a 3.5-inch
HDD" on page 86.
16.3.1.4 Concluding steps
Ê "Reassembling" on page 51
Ê "Connecting the power cord" on page 56
Ê "Switching on the server" on page 57
To Next Page
Loading...
