Garmin CIRRUS PERSPECTIVE TOUCH+ - Page 70

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A
44
Flight Management
Flight
InstrumentsEIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
AvoidanceAFCS
Additional
FeaturesAnnun/AlertsAppendixIndex
Flight
InstrumentsEAS
Audio and
CNS
Flight
Management
Hazard
AvoidanceAFCS
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
5) Use the keypad and the Enter Button to select a user waypoint name.
6) If desired, touch the Type Button to open the 'Select User Waypoint Type' Screen to
change the setting from Route to Airport.
a) Touch the Airport Button.
b) Touch the Elevation Button.
c) Use the keypad and the Enter Button to select the airport elevation.
7) If desired, change the waypoint comment:
a) Touch the Comment Button to display the keypad.
b) Use the keypad and the Enter Button to select the comment.
8) Touch the Create Button to create the new waypoint.
9) Touch the Back Button to deactivate the panning function and return to the previous
display on the Touchscreen Controller.
Editing a user waypoint comment:
1) From MFW Home, touch Waypoint Info > User Waypoint.
2) If needed, touch the WPT List Tab to display the list of user waypoints, and touch the
desired User Waypoint Selection Button.
3) Touch the Waypoint Options Button to display the 'Waypoint Options' Window.
4) Touch the Edit Button to display the 'Edit User Waypoint' Screen.
5) Touch the Comment Button to display the keypad.
6) Use the keypad and the Enter Button to select a user waypoint comment (up to 25
characters).
7) Touch the Save Button to accept the new comment.
8) Touch the OK Button in response to the question "Are you sure you want to modify this
waypoint?".
9) If the user waypoint is part of an existing flight plan, a second pop up window is
displayed. Touch the OK Button in response to the question "User waypoint is part of at
least one flight plan. Any modifications affect the associated flight plan(s).".
Editing a user waypoint name:
1) From MFW Home, touch Waypoint Info > User Waypoint.
2) If needed, touch the WPT List Tab to display the list of user waypoints, and touch the
desired User Waypoint Selection Button.
3) Touch the Waypoint Options Button to display the 'Waypoint Options' Window.
4) Touch the Edit Button to display the 'Edit User Waypoint' Screen.
5) Touch the User Waypoint Name Button to display the keypad.
6) Use the keypad and the Enter Button to select a user waypoint name.
7) Touch the Save Button to accept the new name.