GE Brivo OEC 715 - Page 368

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
6-34
Exception
ID
Error
Warning
Exception
Description
(In system Log)
Message
(Displayed in User Interface)
Diagnosis Reference
0310501
Warning
Get image and
zoom
information
from IE failed
Workstation communication
exception. Can’t get image and
zoom roam data from the left
monitor. Please restart the
system. If this issue persists,
please call for service.
1. Restart the system.
2. If not work, re-install
Workstation software.
0310502
Warning
Set zoom to IE
failed
Workstation communication
exception. Can’t set zoom
roam data to the left monitor.
Please restart the system. If
this issue persists, please call
for service.
1. Restart the system.
2. If not work, re-install
Workstation software.
0310503
Error
ZoomRoam
module register
servant
exception
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
1. Restart the system.
2. If not work, re-install
Workstation software.
0310504
Error
ZoomRoam
module
subscribe sync
event exception
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
1. Restart the system.
2. If not work, re-install
Workstation software.
0310505
Error
ZoomRoam
module
unsubscribe
sync event
exception
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
1. Restart the system.
2. If not work, re-install
Workstation software.
0310506
Warning
ZoomRoam
module
unregister
servant
exception
Workstation communication
exception. Please restart the
system. If this issue persists,
please call for service.
1. Restart the system.
2. If not work, re-install
Workstation software.
0310507
Warning
Init zoom
controller
exception
Zoom Roam init exception.
Please restart the system. If
this issue persists, please call
for service.
1. Restart the system.
2. If not work, re-install
Workstation software.
0310508
Warning
Parse data
exception
Parse Zoom Roam data
exception. Display may be
abnormal. Please restart the
system. If this issue persists,
please call for service.
1. Restart the system.
2. If not work, re-install
Workstation software.