GE MDS ORBIT ECR - Page 118

118 MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F
data-compression lzo;
header compression false;
power 20;
dwell-time 75;
beacon-interval 25;
hop-set b;
security {
security-mode psk;
encryption aes128-ccm;
passphrase mypassphrase;
}
advanced-config {
lna-state high-immunity;
avoided-frequencies [ 915-920 ];
stale-packet-timeout 1250;
propagation-delay 60miles;
mcast-repeat 0;
data-retries 0;
fragment-threshold 50;
remote-age-time 600;
endpoint-age-time 300;
allow-retransmit true;
arp-cache false;
adr-mode none;
adr-threshold -70;
encryption-protocol 2.0;
}
Remote Mode
The following will configure the NX915 module as a Remote with the network name of 'MyNetwork' and
default settings.
% set interfaces interface NxRadio nx-config device-mode remote network-name MyNetwork
% show interfaces interface NxRadio nx-config | details
modem-mode 500kbps;
device-mode remote;
network-name MyNetwork;
data-compression none;
header-compression false;
power 30;
security {
security-mode none;
encryption none;
}
advanced-config {
lna-state high-sensitivity;
stale-packet-timeout 1500;
data-retries 3;
nic-id 0;
gateway-id 0;
arp-cache false;
adr-mode none;