EasyManuals Logo

GE MDS ORBIT ECR User Manual

GE MDS ORBIT ECR
463 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #111 background imageLoading...
Page #111 background image
MDS 05-6632A01, Rev. F MDS Orbit MCR/ECR Technical Manual 111
Phys Address- The interface's address at its protocol sub-layer. For example, for an 802.x
interface, this object normally contains a MAC address. The interface's media-specific
modules must define the bit and byte ordering and the format of the value of this object. For
interfaces that do not have such an address (e.g., a serial line), this node is not present.
Statistics - A collection of interface-related statistics objects.
Figure 3-56. ISM 900 (NX) AP Statistics
Discontinuity Time - The time on the most recent occasion at which one or more of this
interface's counters suffered a discontinuity.
In Octets - The total number of octets received on the interface, including framing characters.
In Unicast Pkts - The number of packets, delivered by this sub-layer to a higher (sub-)layer,
which were not addressed to a multicast or broadcast address at this sub-layer.
In Broadcast Pkts - The number of packets, delivered by this sub-layer to a higher (sub-
)layer, which were addressed to a broadcast address at this sub-layer.
In Multicast Pkts - The number of packets, delivered by this sub-layer to a higher (sub-)layer,
which were addressed to a multicast address at this sub-layer.
In Discards - The number of inbound packets which were chosen to be discarded even though
no errors had been detected to prevent their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to free up buffer space.
In Errors - For packet-oriented interfaces, the number of inbound packets that contained
errors preventing them from being deliverable to a higher-layer protocol.
In Unknown Protos - For packet-oriented interfaces, the number of packets received via the
interface which were discarded because of an unknown or unsupported protocol.
Out Octets - The total number of octets transmitted out of the interface, including framing
characters.
Out Unicast Pkts - The total number of packets that higher-level protocols requested be
transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer,
including those that were discarded or not sent.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE MDS ORBIT ECR and is the answer not in the manual?

GE MDS ORBIT ECR Specifications

General IconGeneral
BrandGE
ModelMDS ORBIT ECR
CategoryNetwork Router
LanguageEnglish

Related product manuals