MDS 05-6632A01, Rev. F MDS Orbit MCR/ECR Technical Manual 177
Figure 3-91. Copy Image
The following example shows how to have the device copy the active firmware image to the inactive
firmware image from the CLI:
> request system firmware copy-image
Monitoring - Copy
Once the copying is begun, the current status of the copying process is displayed on the web page. Note
that the web page does not display the current status if the device has not been instructed to copy the
firmware image (in other words, if the state is “inactive”).
Figure 3-92. Copy Image Monitoring
The copy status contains the following items:
Current State – The status of the copying task:
- inactive
- processing
- complete
- failure
Detailed Message – The details regarding the operation, such as “Copying host firmware
image”
Size – The total number of bytes in the image (not displayed on the web UI)
Bytes Transferred – The number of bytes already processed (not displayed on the web UI)
To Next Page
Loading...
