MDS 05-6632A01, Rev. F MDS Orbit MCR/ECR Technical Manual 81
- 802.11b
- 802.11g
- 802.11n
NOTE The following are advanced WiFi network settings and should only be modified with the
assistance of a network engineer.
Dtim Period – DTIM (delivery traffic information message) period. The number of beacons
between DTIMs. Valid Values: 1-255, DEFAULT - 2.
Rts Threshold – RTS/CTS Threshold. Valid Values 0-2347, DEFAULT - 2347 (disabled).
Fragm Threshold –Fragmentation Threshold. Valid Values 0-2346, DEFAULT - 2346
(disabled).
To add an AP, click on the ADD button, or to delete an AP, click on the SSID and then the Delete button.
By default, an access point will be configured with the SSID, GEMDS <SERNUM> and the WiFi
password, GEMDS-ORBIT. To edit an AP, click on the SSID of the configured network. In the
following example, the SSID is GEMDS_2344676.
Figure 3-33. WiFi AP Details Configuration Screen
Broadcast Ssid – If checked (true), the SSID will be broadcast.
Station Max – The maximum number of clients that will be allowed to connect to this access
point. Valid values: 1-max (7 = DEFAULT, max = 7 )
Station Timeout – The number of seconds a station may be inactive before the access point
will verify that the station is still within range. Valid values: 1-300 (300 = DEFAULT)
To Next Page
Loading...
