GE MDS ORBIT ECR - MAC Stats; Modem Stats

134 MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F
- Configuring - Configuring the NIC
- Complete - Initialization complete
 Current Device Mode – Read-only display of the active mode the LnRadio is operating.
 Alarms - The current NIC alarms:
- synthesizer-out-of-lock: Synthesizer is out of lock. Call GE MDS tech support for
assistance.
- radio-not-calibrated: Radio was not calibrated. Call GE MDS tech support for assistance.
- internal-temp: The radio’s internal temperature exceeds the operating threshold.
 Firmware Revision - NIC Firmware Revision.
 Temperature - The transceiver temperature in degrees C.
 Modem Tx Success – Number of packets successfully transmitted by the modem.
 Modem Tx Error – Number of transmit errors reported by the modem.
 Modem Rx Success – Number of packets successfully received by the modem.
 Modem Rx Error – Number of receive errors reported by the modem.
 MAC Tx Success - Successful transmissions.
 MAC Tx Queue Full - Failed transmissions, MAC queue full.
 MAC Tx Error - Packets dropped for other reasons.
 MAC Tx Retry - Re-transmission count due to previously unsuccessful transmission.
 MAC Rx Success - Valid packet received.
 MAC Rx Error – Received packets dropped due to error.
Modem Stats
MAC Stats