GE MDS ORBIT ECR User Manual

230 MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F
Once all selections are complete, click Next to continue. The Interface Selection menu appears.
Figure 3-141. Interface Selection Menu
The Interface Selection menu allows the created rule set to be applied to one or more interfaces. To do so,
click the drop-down box next to the desired interface and select the rule set name. In the example above,
the new rule set should be applied to the cellular interface. Click Next to continue.
Figure 3-142. Source NAT Wizard Summary Page
A summary page appears that displays the changed items in the configuration’s data model, and the types
of changes that occurred. To save and apply the changes, click Submit.
Using the Web UI
The following process creates the same Source NAT rule set as the example above, using the web UI
instead of the Source NAT Wizard. Before using source NAT, the firewall service must be enabled.
Select the Firewall system tab. Check the box next to Enabled on the Basic Config tab and click Save in
the upper left corner of the screen.
Figure 3-143. Enabling the Firewall service

GE MDS ORBIT ECR Specifications

General

Brand	GE
Model	MDS ORBIT ECR
Category	Network Router
Language	English